oiram
05-12-2007, 06:27 AM
Let’s have a look at this one a smoking torch!!
Click here: http://indonesian.10001mb.com/s/911_smoking_gun/
(or you can't see the pic, just right click and hit Show Picture) (http://indonesian.10001mb.com/s/911_smoking_gun/)
http://www.indonesian.10001mb.com/s/images/911_45_degree_cut1.jpeghttp://www.indonesian.10001mb.com/s/images/911_45_degree_cut0.jpeg
In a way this Photo is evidence by it self!
This box Colum "beam" speaks to me in a big way and you mentioned that this was not the only one so I have no more questions!
I would like to see a 75mm test plate being cut with a Thermite charge and compare it with the Photo!
If this is really a photo only one day after the collapse someone should ask the investigation guys what they don with this nice piece! Why would they not check if this nice ¾ cut was created with a hand cutting torch! You can actually see by the color that the top 100mm part is Sheared off! Also the bottom got 50mm Sheared! Again my conspiracy brain tells me logically that even if someone would have cut this Box Colum "beam" on the ground it would still have his top section attached! Also where is the matching piece if it was cut on the ground!
Also if I would get the job to cut this box Colum "beam" on the ground I would cut straight across because it would be much less cutting “right”!
Who was the man who cut this he will remember believe me!
One more thing I can see the top 100mm got a splice plate ore a backing plate and I tell you that you will not be able to cut the top plate by hand cutting torch if you don’t cut the backing plate off “no way”! You make a test piece 75mm tick put a backing plate on it and try to cut the big plate from outside inward! You would never get a clean cut and there be slag all over! But as you can see it is not even Blacken from any cutting!
I am from the trade so I know what I am talking about!
Who was the Investigation guy on the job to miss this one and did not keep this as evidence! Don’t need to tell me I know!
They should check who and when he made the photo!
They should ask the removal guys who cut this master piece and what he don with the top section! All the ones working in the area must have a security clearance and will have his name on some list! If they don’t find the one who cut this would mean again “case closed”??
One more look at the amount of slag on the front plate! For logical and practical reasons you would not cut this from inside out! So that would mean when you cut this the slag will end up inside and not outside also it would not run down in this quantity!
I would not accept a pencil pusher from your government telling me how this job works if he is not cutting the Colum "Beam" by him self and proofs this to all! That would be fun to have Mr. Bush running around with a cutting torch!
The one who would say that I am full off conspiracy I would give him a hand cutting torch and like to see him cutting a box Colum "beam" of this size in this condition and position! Then and only then I would take an insult!
So what excuse would the pencil pusher give; that the terrorist went out of the plane with the cutting torch to the ground floor cut the Colum "beam" 45 degrees went back up to the plane and died?
If you not a trades man working with steal you better talk to one first!
Notice you can actually see the MOLTEN METAL around the 45 DEGREE ANGLE CUT!!!
Watch it here:
http://www.youtube.com/watch?v=9J8ojEWlkrs
Click here: http://indonesian.10001mb.com/s/911_smoking_gun/
(or you can't see the pic, just right click and hit Show Picture) (http://indonesian.10001mb.com/s/911_smoking_gun/)
http://www.indonesian.10001mb.com/s/images/911_45_degree_cut1.jpeghttp://www.indonesian.10001mb.com/s/images/911_45_degree_cut0.jpeg
In a way this Photo is evidence by it self!
This box Colum "beam" speaks to me in a big way and you mentioned that this was not the only one so I have no more questions!
I would like to see a 75mm test plate being cut with a Thermite charge and compare it with the Photo!
If this is really a photo only one day after the collapse someone should ask the investigation guys what they don with this nice piece! Why would they not check if this nice ¾ cut was created with a hand cutting torch! You can actually see by the color that the top 100mm part is Sheared off! Also the bottom got 50mm Sheared! Again my conspiracy brain tells me logically that even if someone would have cut this Box Colum "beam" on the ground it would still have his top section attached! Also where is the matching piece if it was cut on the ground!
Also if I would get the job to cut this box Colum "beam" on the ground I would cut straight across because it would be much less cutting “right”!
Who was the man who cut this he will remember believe me!
One more thing I can see the top 100mm got a splice plate ore a backing plate and I tell you that you will not be able to cut the top plate by hand cutting torch if you don’t cut the backing plate off “no way”! You make a test piece 75mm tick put a backing plate on it and try to cut the big plate from outside inward! You would never get a clean cut and there be slag all over! But as you can see it is not even Blacken from any cutting!
I am from the trade so I know what I am talking about!
Who was the Investigation guy on the job to miss this one and did not keep this as evidence! Don’t need to tell me I know!
They should check who and when he made the photo!
They should ask the removal guys who cut this master piece and what he don with the top section! All the ones working in the area must have a security clearance and will have his name on some list! If they don’t find the one who cut this would mean again “case closed”??
One more look at the amount of slag on the front plate! For logical and practical reasons you would not cut this from inside out! So that would mean when you cut this the slag will end up inside and not outside also it would not run down in this quantity!
I would not accept a pencil pusher from your government telling me how this job works if he is not cutting the Colum "Beam" by him self and proofs this to all! That would be fun to have Mr. Bush running around with a cutting torch!
The one who would say that I am full off conspiracy I would give him a hand cutting torch and like to see him cutting a box Colum "beam" of this size in this condition and position! Then and only then I would take an insult!
So what excuse would the pencil pusher give; that the terrorist went out of the plane with the cutting torch to the ground floor cut the Colum "beam" 45 degrees went back up to the plane and died?
If you not a trades man working with steal you better talk to one first!
Notice you can actually see the MOLTEN METAL around the 45 DEGREE ANGLE CUT!!!
Watch it here:
http://www.youtube.com/watch?v=9J8ojEWlkrs