John Searl's free energy+gravity vehicle.

[frank1974]

http://www.searlsolution.com/index.html

He is an example of what our minds are capable of when we think free and without prejudice.

Is John Searl's technology responsible for ufo sightings of flying saucers from the 60's?

If he can achieve his goal on probably his last attempt before he dies, we'd all have free electricty in a healing atmosphere in our homes. The negatively charged ions that are emitted from the device causes rapid healing, so much that 1st degree burns can be totally healed with no scarring. John Searl was in a massive explosion, his head on fire, burns so severe his jugular vein ruptured, he was near death and had injuries like that of Simon Weston suffered in the Falklands. Yet John Searl has no scarring.

[stargazer]

Nice one!

If I understand this correctly, the only problem why we don't use the SEG is in manufacturing for sale. I think that is never going to work, because he's trying to sell it and make money out of it. And who invented the economic system? Illuminati (or some other like them)? I don't think they will allow it, unless it brings more control and manipulation.

I think that the alternative is to send the plans (of SEG) to everyone all over the world at the same time. Well that would be a hard one to stop, as the Illuminati depend on the pyramidical system for control.

If you can't beat the chess master, redesign the chessboard!

[frank1974]

The only reason we don't have it is because he has never been able to get backers with the financial clout to cover his costs, until now. Like he says, its about the money needed for a production line capable of producing them quickly, like a single brick would cost millions of pounds for the first brick because of the cost of machinery needed to make that one brick, but after the first brick, they cost virtually nothing.

The first SEG costs a fortune to make because of the equipment needed to make it. His final estimate for retail price is £1000 for an SEG that will provide the clean electricty for your home continually for at least 50 years with no maintenance. The most important thing, clean electricity that doesn't have any harmful electro-magnetic radiation, but instead beneficial health and healing as a side effect.

His history is tragic beyond belief. A Dr Barnados orphan child, brought up in foster care, suffered sexual abuse, and very little formal education. Locked up in prison for years for 'defrauding the electricity company' because they wouldn't accept that it was his SEG powering his home. On leaving prison all his prototypes of SEG's and IGV's (Inverse Gravity Vehicle) and machinery and property were gone, his lifes work taken from him by the authorities whilst in prison.

They've tried to break this man numerous times, yet he keeps coming back.
I for one wish him luck. And he is at least getting some support now as attitudes have changed to the possibility that his inventions could actually work. Its taken science 60 years to catch up with his knowledge. The delay now is the steps needed to document every stage of development for patent applications of which there are many. Its a very simple machine thats incredibly difficult and expensive to manufacture, and needs very complicated explanations to explain how it works.

Unlike the John Bedini school girl motor/circuit. Which was built by a school girl who then won at a science fair.

[veritas2007]

I think this is one of the most awe inspiring inventions I have ever heard of. Thank you for sharing this information.

:)

[frank1974]

Thought I'd post a brief history of current progress on the SEG development, so anyone who's not a member has an idea of whats happening. And to comment that Professor John Searl is giving away this invention to anyone capable of building it, having the money for machinery/factories is the main problem. Members get access to all the technical documents, current progress of development etc.
------------------------
24 April 2007
Prof. Searl and his backer met with a solicitor and with patent officials. One of them was a scientist whose task was to certify if the invention can be marketed. The meeting concluded with a positive confirmation from the officials that this invention can be so marketed.

11 June 2007
From Israel and Malta, Prof. Searl's guests are Engineers in the field of rocket and solar energy systems. They have taken the first steps towards producing the SEG from their respective countries.

Thanks to the commitment of our team members and supporters of this project, we can now confirm that the four material layers needed to construct the first SEG Plate has now been realized as shown within this image. The precision machining of these materials will be within 10 microns and it is expected to take up 3 months to complete. Note that each ring layer has an individual electronic function, working all together to form a unique solid state magnetic diode.

15 June 2007
Professor John R. R. Searl is honored to receive for the second year in a row, the 2007 Loris Hemlof Prize for Best Free Energy Technology along with a contribution of £500 pounds sterling.
This award was considered among over 100+ energy technologies listed by Loris Erik Kent Hemlof home page at: http://www.users.on.net/~lekh/

25 June 2007
Prof. John Searl has accepted the invitation to Thailand and an agreement has been reached. Thailand will become the first international country to start the development and manufacturing of the Searl Effect Technology.
The acquisition of production equipment has already started in Thailand.

23 July 2007
Prof. Searl is invited by Mirco to inspect their factory in Italy for the purpose of manufactuing the S.E.G layers and he was handed the following document;

With the precious help of Prof. John Roy Robert Searl realizing in Italy the S.E.G. to create a system of energy at a very low cost free and non-polluting for the continuation of the human race.

Prof. Searl has announced that Italy is now joining this R&D program as of this date.

02 Oct 2007
Some of Prof. Searl’s team members are testing the external induction for tapping energy out of the SEG Mockup. This is yet another core principle of the SEG concept that can now be tested and evaluated.

03 October 2007
The Copper Emitter and the Magnetic layer of the SEG prototype are now pressed together. Notice the teflon block beneath, it will be machined later to form the Gate. We truely hoped to be further along with it, but so much of our efforts has shifted towards the preparations of the new lab facilities now that this project is funded; this will indeed speed up our progress for the long run.

13 October 2007
The three set of SEG copper emitters have arrived in their basic sizes. The Searl team will mill of each ring carefully since it requires greater precision than the supplier can provide.
This marks the day all four-component layers are set as one complete unit.
This is the first of three sets needed to complete the SEG experimental prototype scheduled for 2008.
------------------------

This is truely a worldwide collaboration working together to help build the SEG.

[dude111]

An interesting page my friend!

He is an example of what our minds are capable of when we think free and without prejudice.I believe ATHIESTS/AGNOSTICS are also able to think free :)

[upliftin]

Time to revive this thread!

Searl has set up a HQ in Southern California, to redevelop the SEG. Things are looking up for them, check out their websites:

www.searlmagnetics.com - Johns magnetics company
www.searlsolution.com - Johns information page and history
www.swallowcommand.com - Johns page for the flying side and following the redesign of the SEG

I really do hope this is done soon as we need this and i fully support this idea.

Also recently he was entered into the GE Ecomagination challenge and was places 25th out of 3800 entries and currently he is the 2nd most commented idea!
http://challenge.ecomagination.com/ct/ct_a_view_idea.bix?c=12EB3117-EA0C-41EB-B657-5A60BD78BD2A&idea_id=6AEC2B12-BCFE-4623-BBDB-AD3A6AA30CFE

peace and love!
:)

[foobar]

Why does John Searl refer to himself as 'Professor' Searl?

Can anybody find a peer reviewed scientific paper ever published by him ?

Which university awarded him a professorship?

On his website he claims it was Munich. But he's never taught there or published any peer reviewed papers.

He also claims to have been awarded a BA (Hons) at Russell-Cotes Nautical School. At the age of 14. And then takes a series of jobs that don't require any post-16 education. And Russell-Cotes was a naval school for 11-14 year olds that doesn't award degrees. Nobody's ever seen any of his devices working.

This bloke is clearly delusional. I'm amazed nobody bother's checking this stuff. Even his own version of his biography is obviously nonsense.

[elpressiedente]

having had Searle visit my farm here in OZ back in 1995, and subsequently a number of day long meetings after that, I am surprised anyone can figure out how to duplicate his claims of a working device made over 40 years ago with a lot less sophisticated tools....


i too await for results but I aint holding my breath